How to Turn Windows 10 into a WiFi Hotspot

How to Turn Windows 10 into a WiFi Hotspot - First announced in March 2017, the Xperia L1 has come to replace Sony’s now discontinued E series. Priced at a surprisingly cheap £169, the L1 is Sony’s newest attempt at shaking up the budget phone market. Its large screen and sleek design make us think of Sony’s higher range of smartphones: it would be hard to single it out as the cheapest model in a line of Xperias. But at such a bargain price, we can’t expect it to perform as well as its more expensive counterparts. So how does the L1 hold up to other low-budget smartphones? Here’s our Xperia L1 review. first time the View branding, well we have collected a lot of data from the field directly and from many other blogs so very complete his discussion here about How to Turn Windows 10 into a WiFi Hotspot, on this blog we also have to provide the latest automotive information from all the brands associated with the automobile. ok please continue reading:

Windows 10 allows you to start a Wi-Fi hotspot on your computer, allowing you to share your wireless connection with several devices. This could be a useful thing if you are restricted to just one device per person on the Wi-Fi network or perhaps if you have only one password.

Set Up Wi-Fi Hotspot Using the Command Prompt

This method does not require you to download any third-party application. You can easily set up a Wi-Fi hotspot using the built-in tools in Windows.

First, you need to open the command prompt with administrator privileges. Press the “Windows + X” key on yourkeyboard and select “Command Prompt (Admin)” from the pop-up menu.

Now we will create the hotspot. Simply enter the following command and press the Enter key:

netsh wlan set hostednetwork mode=allow ssid=maketecheasier key=password

The SSID is the name of the WiFi connection and can be changed to anything you want. The KEY is the password and can be changed, also but bear in mind that it has to be at least eight characters.

Next you need to start the following command to start the WiFi hotspot:

netsh wlan start hostednetwork

Your WiFi hotspot should be activated and usable. You can check its status in the network and sharing center of your control panel.

You can now connect your devices to the hotspot and use the same WiFi connection without using third-party tools.

You can turn off the hotspot when not in use with the following command:

netsh wlan stop hostednetwork

Set Up WiFI Hotspot with Connectify Hotspot

If you’re not a fan of the above method, there are several applications that you can download and use to share your WiFi connection with other devices.

One of the more popular ones is Connectify Hotspot. Its free version basically does the same thing with the Command Prompt method, but you can turn your computer to a wired router or WiFi repeater with a subscription.

Once the application is installed, click the “Try it out” button to start using the tool. Your hotspot will be assigned a default name and password, but you can change this. Keep in mind that with the free version your hotspot name must start with “Connectify.” For example: “Connectify-me” or “Connectify-mte.”

Make sure to choose the correct Internet connection to share and set your password. Once done, you can start the hotspot by clicking the “Start Hotspot” button.

Now you can connect any other device to your Connectify Hotspot as you would with any other WiFi hotspot.

Let us know your preferred method of creating a WiFi hotspot on your Windows PC. If you have any alternatives to Connectify, don’t forget to share them in the comments section below.