Dealing with Overdialing in Lync/Skype for Business

Dealing with Overdialing in Lync/Skype for Business - First announced in March 2017, the Xperia L1 has come to replace Sony’s now discontinued E series. Priced at a surprisingly cheap £169, the L1 is Sony’s newest attempt at shaking up the budget phone market. Its large screen and sleek design make us think of Sony’s higher range of smartphones: it would be hard to single it out as the cheapest model in a line of Xperias. But at such a bargain price, we can’t expect it to perform as well as its more expensive counterparts. So how does the L1 hold up to other low-budget smartphones? Here’s our Xperia L1 review. first time the View branding, well we have collected a lot of data from the field directly and from many other blogs so very complete his discussion here about Dealing with Overdialing in Lync/Skype for Business, on this blog we also have to provide the latest automotive information from all the brands associated with the automobile. ok please continue reading:

If you've never heard the term "overdialing", you're not alone. I hadn't heard of the term either until Greig Sheridan mentioned the term to me one day. But after reading a few definitions on the web, I realized that I knew about it, but didn't know it had a name.  Granted, the definitions I found were all from Australian sites, so maybe its an Aussie thing. My Australian exposure has gone up dramatically since joining Event Zero back in February, so maybe it's to be expected, along with the increased incidents of me saying things like "mate", "throw another shrimp on the barbie", and "a dingo ate my baby."

Anyways..."overdialing" can be thought of as what happens when people try to dial a phone number with more digits than are actually allowed by the PSTN carrier.  This often pops up with numbers that are presented as words, like 1-800-BUYSTUFF, which has 1 too many digits/letters for the North American dial plan (all numbers are 11-digits long, including the 1).

A somewhat little known fact is that you can type the above example exactly like that in Lync/SfB and it will automagically translate the letters to the corresponding numbers and show the number 1-800-289-78333.  Again, notice its got one too many digits and hasn't normalized (note the lack of + sign at the beginning of the number).

The reason for this is because most typical normalization rules only match a very specific number of digits.  Take for example, this typical North American normalization rule and translation pattern for North American national numbers:

^1?(\d{10}) --> +1$1

For the uninitiated, this normalization rule will accept any 10-digit number, with or without a leading 1, and will translate it to a valid 11-digit North American national number.  So, if you dial 5552223333 or 15552223333, it will normalize it to +15552223333.

But if you dial one or more extra digits, it will no longer match the normalization rule and will just show the digits you typed. If you typed 55522233331, and try to dial that number in Lync/Skype for Business, it may or may not fail depending on how you created your route patterns. For example, if you've structured your route pattern to accept numbers without a leading plus sign, it would route through Lync/S4B (ie.  ^\+?\d+$ would accept any number of digits with or without a plus).  I don't advise this, because its messy and makes advanced routing decisions harder. Plus it goes against the general advice of E.164 EVERYWHERE.

If you allowed a number to get through to the PSTN with too many digits, the carrier will reject any extra digits and dial the number properly, but for systems like Lync/Skype for Business, you should take care to ensure you deal with overdialed numbers seamlessly.

To make sure any overdialed numbers are normalized correctly, a simple extra few characters added to the end of a normalization rule will fix the problem nicely. Using the first example, we simply add a \d* to signify "any number of digits", followed by a $ to signify the end of the string.  So, ultimately we have:

^1?(\d{10})\d*$ --> +1$1

Now, when we dial that same number with too many digits, we get the following properly formatted normalized result:

In the end, a simple change to an otherwise generic normalization rules can end up making your users' lives just a little bit easier.

Thanks to the aforementioned Greig Sheridan, who suggested I write a blog post around this esoteric topic. I owe you a Foster's, mate!