How to Fix Error 4013 on Apple iPhone 6

How to Fix Error 4013 on Apple iPhone 6 - First announced in March 2017, the Xperia L1 has come to replace Sony’s now discontinued E series. Priced at a surprisingly cheap £169, the L1 is Sony’s newest attempt at shaking up the budget phone market. Its large screen and sleek design make us think of Sony’s higher range of smartphones: it would be hard to single it out as the cheapest model in a line of Xperias. But at such a bargain price, we can’t expect it to perform as well as its more expensive counterparts. So how does the L1 hold up to other low-budget smartphones? Here’s our Xperia L1 review. first time the View branding, well we have collected a lot of data from the field directly and from many other blogs so very complete his discussion here about How to Fix Error 4013 on Apple iPhone 6, on this blog we also have to provide the latest automotive information from all the brands associated with the automobile. ok please continue reading:

Error 4014 or 4013 is found to be tied to a hardware problem while attempting to upgrade your iPhone to the latest iOS version via iTunes. The error is typically associated with a faulty cable, faulty port, and the like. For example, while attempting to upgrade your iPhone, you place it on the surface and connect it to the computer. While iTunes is able to recognize your device, it thinks that somewhere down the line the cable or port is not really that good.

Before you begin applying any potential fixes, I strongly suggest you do the following:

• ensure you are using the latest iTunes version.
• ensure your iPhone has sufficient memory space to bring in a new update. One gigabyte or more is recommended.
• ensure your iPhone has enough battery power or sufficiently charged.

1st Workaround: Change the USB port/cable

As your first approach to fixing the error, try to change the USB port to which you connect the iPhone. Also try to change the cable you are using.
You can also try to use a different computer which has the latest iTunes version installed, if available. Doing so will help you further isolate the problem.

2nd Workaround: Backup Files and enter Recovery Mode

If this error still prompts even after changing the cables/port, while you're attempting to update the firmware without doing a clean restore, then you can immediately proceed with restoring your iPhone. But before you start, ensure you back up all your important files. You may refer to the following procedures, if you want.

1. Connect your iPhone to the computer.
2. Open iTunes.
3. Backup your iPhone.
4. After successfully backing up all your files, disconnect the iPhone and then exit iTunes.
5. Put your iPhone in recovery mode. You can do this by pressing and holding the power and home buttons on your phone until the screen goes blank.
6. Now go to your computer and open iTunes.
7. Connect your iPhone to the computer. iTunes will let you know if your phone is successfully connected and recognized in Recovery mode.
8. Whenever you're all set, go ahead and restore your phone as new. Doing so will erasing everything in it. No worry though because you have the backup to restore from.

Others who have encountered the same error code has fixed it by simply clearing out some apps and apps memory to free up some space on their device. So you might as well give it a try. There's nothing to lose if you do so, though.